Thanks Spence, it arrived safe and sound with me.
I have a quick question to everyone, which may have been asked before, but I'm not going back through 12 pages of posts to see :bonk:
During the calibration it asks you to reset the monitor to default, this sets my RGB to 50/50/50, brightness to 100, contrast to 70 and Gamma to 0. Once the calibration is done, profile created and set as the default, am I right in thinking that the profile itself then controls the actual Brightness, Contrast and Gamma to the screen as I expecteed to have to adjust these on the monitor as I did for the RGB settings during the calibration, which ended up at 48/52/50 to achieve the closest 'difference' value (I got 0.001, which is quite a good attempt at <0.5).
Thanks