- Messages
- 5,051
- Name
- Lawrie
- Edit My Images
- Yes
Having some fun with the dishwasher, whish is a 2 yr old Indesit.
For some reason it is getting pat way through a cycle and then tripping the fusebox. Know it is on the RCD protected circuit, but it is not blowing the fuse in the plug, just the RCD.
Did it during the day yesterday, when it was a way into the cycle, so emptied it pulled it out as it wouldn't switch on.
When pulled out, it regained power, so pushed it back in.
When pushed back under the worktop, no power again, so pulled it out and got power.
Ran it half sticking out, and tripped everything out quite early into the cycle.
Any one any ideas?
Still confused, as it has not blown the fuse, just the RCD.....
For some reason it is getting pat way through a cycle and then tripping the fusebox. Know it is on the RCD protected circuit, but it is not blowing the fuse in the plug, just the RCD.
Did it during the day yesterday, when it was a way into the cycle, so emptied it pulled it out as it wouldn't switch on.
When pulled out, it regained power, so pushed it back in.
When pushed back under the worktop, no power again, so pulled it out and got power.
Ran it half sticking out, and tripped everything out quite early into the cycle.
Any one any ideas?
Still confused, as it has not blown the fuse, just the RCD.....
it takes very little to trip an RCD, you have more than likely found the cause of it
get a Bosch or a miele and you'll be set for years