What size filters for sigma 10-20mm

[Andy77]

just wondered what size filters i would need for the sigma 10-20mm, going to buy from teamworkphoto but do i buy the 85mm,100mm or 150mm filters?

http://www.teamworkphoto.com/index....ath=78&zenid=2d468366c6ad380cfbfc9f29a9509dfd

as said will be used with a sigma 10-20mm and just wondered if there was a minimum size to use as its a UWA lens, i know ill have to buy a wide angle holder.

Thanks Andy

 

[Robbo]

whats wrong with the 77mm filters that will screw in?

 

[Flamez]

ordinary holder and p size wok with mine

 

[Shine On]

I've got both standard and ultra wide p-type filter holders from www.premier-ink.co.uk, and at 10mm the standard holder is visible in the frame due to the extra depth i.e. The standard holder will accept multiple filters at the same time.

 

[mickledore]

I use Cokin P filter sytem with 77mm screw adaptor. Works fine.

 

[SAuchterlonie]

I use the Lee and Singh Ray 100x150 on my Sigma 10-20 and have seen no problems and would highly recommend them.

Simon

 

[dcash29]

The wide P filter is also visible between 10-12mm

 

[Tight Fart]

I just leave a 77mm polarizer on mine.

 

[wavefront]

My cokin z-pro holder holding 100mm filters with three slots are visible at 10mm. With one slot it's fine though.

I sometimes have an issue with coverage when I tilt my grads at an angle and it doesn't cover all the frame (at the corners you sometime see the edge of the filter) - but maybe I haven't centred the grad properly and it's user error

 

[DekHog]

The P size is fine... all you do is buy an extra cheap holder from eBay, then cut off the front two filter slots, just leaving the one. No vignetting problems, even when at 10mm and stopped down.

 

[Andy77]

The P size is fine... all you do is buy an extra cheap holder from eBay, then cut off the front two filter slots, just leaving the one. No vignetting problems, even when at 10mm and stopped down.

Liking this idea..........

 

[DekHog]

Liking this idea..........

...and you don't need the wide angle holder either, the standard does it no problem. Been there and done it...

 

[Barrysprout]

...and you don't need the wide angle holder either, the standard does it no problem. Been there and done it...

Thanks for that information and thanks to OP for posing my question for me
Got my 10-20 this morning so filters are next on my shopping list. It's been an expensive week.

In fact I was in Dundee the other night Dekhog collecting the 50D

 

[oglyndwr]

I use the Cokin P wide angle holder. Not visible at all at 10mm. If I stack it on top of a Hoya Pro Digital CP it is not visible at 12mm