Toploader for D7000 + lens

specialman

Suspended / Banned
Messages
8,193
Name
Pat MacInnes
Edit My Images
Yes
Going snowboarding on Saturday and although I'm taking by Burton Zoom pack with most of my DSLR kit, I also want a toploader for an ungripped D7000 plus a 17-55mm.... anyone got any suggestions that won't break the bank? It's going inside a heli pack but I just want a tad extra protection, hence a top loader.

I was looking at getting a used GF1 or a compact like a P7000 but this is the cheaper way to get decent quality out on the slopes....
 
Look for an older style Lowepro TLZ1, usually a few on Ebay

I use one in the same way as you describe, my Canon 7D and 17-55mm f2.8 fits and believe the D7000 is a smaller body

If you get stuck welcome to borrow mine
 
Last edited:
Last time I took my DSLR on the slopes I just borrowed a few big jiffy bags from work to keep my camera in when it was in my rucksack - added benefit was that the bubble wrap inside the jiffy bags protected my camera when the bottle of water also in the rucksack split.
 
Look for an older style Lowepro TLZ1, usually a few on Ebay

I use one in the same way as you describe, my Canon 7D and 17-55mm f2.8 fits and believe the D7000 is a smaller body

I've the TLZ2 and it fits my body + 70-300 in, so yes the 1 should fit your needs easily.
 
You could try a toploader 55aw :)

Its my normal little bag and I can fit my Nikon d3100 attached to 55-300mm and can squeeze in my 18-55mm and a Nikon SB400 flash.
 
I have a toploader lowepro 55aw which is currently holding my:

D7000 with 16-85 lens attached
35mm 1.8G
Jessops AF360 flash

front pouch also holds my two yongnuo flash triggers, graduated filters and a credit card sized memory card USB reader. It'll cope with a suprising amount of kit.
 
It's more about having additional padding for the camera while it's in the backpack, just in case if take a tumble on the slopes. I might end up going down the jiffy bag route - got lots of them :)
 
There's a decent amount of padding on the 55aw but I doubt it's made to stand up to the specific needs that you have (what if it smacks a rock? ;)).
 
I know what you mean Pat. I took a small fall on my Lambretta and the Lowpro Zoom toploader last year and it wasn't enough to protect it, snapping the lens at the mount. It was repaired.
 
Back
Top