The Fabulous Fuji X owners thread

Other than for a couple of weeks, where it got left at my inlaws house, I have managed to keep the little hotshoe cover on my X-T2 for five and half years. This morning, I noticed it was gone. I expect when I was on a very muddy walk in my local woods earlier in the week. :headbang:
 
leaky5 said:
Whoops just bought an X-E1 from WEX. Should be able to pick it up from their White Chapel branch when I am in London working next week
Click to expand...
Really liking feel of the X-E1, although not had a chance to give it a full outside test yet. I have popped the Fuji 27/2.8 onto it and can probably see this lens being on it most of the time. Think it will be perfect for city break holidays, which I have a few planned for this year

Can see it getting more use than the X-T4, I will probably leave the 16-80 on the X-T4
 
Craikeybaby said:
Other than for a couple of weeks, where it got left at my inlaws house, I have managed to keep the little hotshoe cover on my X-T2 for five and half years. This morning, I noticed it was gone. I expect when I was on a very muddy walk in my local woods earlier in the week. :headbang:
Click to expand...
Can't your Lego you, lend you his ;)

But seriously, it sucks when bits get lost. I dare say that they're cheap enough to get a new one.
 
Paulie-W said:
Can't your Lego you, lend you his ;)

But seriously, it sucks when bits get lost. I dare say that they're cheap enough to get a new one.
Click to expand...
I found that you can get 3D printer files for some of these small parts.
 
Craikeybaby said:
Other than for a couple of weeks, where it got left at my inlaws house, I have managed to keep the little hotshoe cover on my X-T2 for five and half years. This morning, I noticed it was gone. I expect when I was on a very muddy walk in my local woods earlier in the week. :headbang:
Click to expand...
I bought replacements on Ebay last year (my X-T30 didn't come with one).

Pardon our interruption...

www.ebay.co.uk
 
Last edited:
Good morning. Just;listed this in the wanted section.

Looking for a Samyang 8mm for a Fuji, thank you
 
Just given into GAS and joined the queue for a X100VI with Clifton Cameras. At least it only cost a fiver to join.
Maybe I’ll get it for some autumn walk shots

Jake
 
Phew. Been so busy lately..... Spent a few days in north Devon last week. Going through Sony files, Fuji files, night sky Sony files! and the drone stuff is... still on the drone.... :)

Anyway... X100f

*** by Lee, on Flickr

*** by Lee, on Flickr

*** by Lee, on Flickr

*** by Lee, on Flickr

*** by Lee, on Flickr

*** by Lee, on Flickr
 
I pointed my 50-140mm at some rally cars this afternoon. Given that I was mainly shooting with the aperture stopped down, I would probably have been better with my 55-200 though, and made use of the extra length. This was my favourite shot.


Escort pan by Lewis Craik, on Flickr
 
If anyone is interested at prices at the Show.

CrIILV5.jpg
 
I have been looking at prices for used Fuji bodies and was surprised to see that X-T2 and X-T20 prices were surprisingly similar, given that there was a decent gap when they were new.
 
That's a 10-2000mm f/1.4 in the background! Only weighs 25g and is a very reasonable £19.99. Available in 13 days but only before noon...
 
I have a question regarding the C1, C2, C3 settings etc.

I have the XS10, I have created and saved the Reggie Porta to C1. So when I turn the dial to C1 the screen says I am using C1.

However, I can still turn the knob at the top where I can change the film sim and go through all the default sims that it comes with...which affect the sim...so how do I actually use the setting in C1?
 
Raymond Lin said:
I have a question regarding the C1, C2, C3 settings etc.

I have the XS10, I have created and saved the Reggie Porta to C1. So when I turn the dial to C1 the screen says I am using C1.

However, I can still turn the knob at the top where I can change the film sim and go through all the default sims that it comes with...which affect the sim...so how do I actually use the setting in C1?
Click to expand...
I don't have this camera, so I'm guessing - but when I save a preset on my X-T20; I can change the settings within it. But if I want to go back to that preset I just reload it so to speak. The settings I'm currently on are marked 'Base' and recalling the preset just changes the settings in 'Base'; as far as I can tell. Is it not the same for the C1, C2 etc?

What I'm getting at is, loading a preset doesn't lock you into its settings, it just loads them up and you can adjust from there.
 
Craikeybaby said:
I have been looking at prices for used Fuji bodies and was surprised to see that X-T2 and X-T20 prices were surprisingly similar, given that there was a decent gap when they were new.
Click to expand...

What sort of prices have you been seeing?
On the hunt for something similar later this year.
 
colourofsound said:
If I ever find an X-E4 that isn't priced more than my liver would get on the black market, my X-T20 will be up for grabs
Click to expand...
The price of a X-E4 are definitely eye watering and was something I'd have taken if market values were normal!
 
colourofsound said:
I don't have this camera, so I'm guessing - but when I save a preset on my X-T20; I can change the settings within it. But if I want to go back to that preset I just reload it so to speak. The settings I'm currently on are marked 'Base' and recalling the preset just changes the settings in 'Base'; as far as I can tell. Is it not the same for the C1, C2 etc?

What I'm getting at is, loading a preset doesn't lock you into its settings, it just loads them up and you can adjust from there.
Click to expand...

Let's say I am in Aperture Priority, I set to Monochrome (so it is obvious).

I turn to C1, it goes to colour....thinking great, I am in my Reggie Porta. So I turn the film sim dial (while still in C1) to Sepia. So now C1 is Sepia.

I go to Aperture Priority, it is in Monochrome

I go back C1, it is in Sepia.

C1 basically remembers my last setting, as opposed to remembering the film sim I saved in settings?
 
colourofsound said:
If I ever find an X-E4 that isn't priced more than my liver would get on the black market, my X-T20 will be up for grabs
Click to expand...

There is one on LCE for £850. Which is basically RRP isn't it?

Wait, that one has gone, only this left.

Second hand cameras, camera part exchange, digital cameras UK, used cameras, photographic shops, England

The London Camera Exchange supplies second hand cameras, new cameras, digital cameras and other camera equipment and provides a camera part exchange in photographic shops all over England, UK.
www.lcegroup.co.uk
 
Last edited:
Raymond Lin said:
Let's say I am in Aperture Priority, I set to Monochrome (so it is obvious).

I turn to C1, it goes to colour....thinking great, I am in my Reggie Porta. So I turn the film sim dial (while still in C1) to Sepia. So now C1 is Sepia.

I go to Aperture Priority, it is in Monochrome

I go back C1, it is in Sepia.

C1 basically remembers my last setting, as opposed to remembering the film sim I saved in settings?
Click to expand...
Based on the manual, sounds like you have 'Auto Update Setting' enabled
 
Raymond Lin said:
There is one on LCE for £850. Which is basically RRP isn't it?

Wait, that one has gone, only this left.

Second hand cameras, camera part exchange, digital cameras UK, used cameras, photographic shops, England

The London Camera Exchange supplies second hand cameras, new cameras, digital cameras and other camera equipment and provides a camera part exchange in photographic shops all over England, UK.
www.lcegroup.co.uk
Click to expand...
On principle, I am not willing to pay RRP for a used unit!
 
colourofsound said:
Bizarre. Maybe save the custom setting again, confirm auto update is off and power cycle the camera? Otherwise I'd say its not doing what its supposed to
Click to expand...

Looks like the recipe is there in the setting under C1, but it applies to ALL The film sims that the dial is set to. So the Reggie Portra will do it's thing on Provia, Velvia etc. Which means I have to remember to turn it to Classic Chrome too when using it.

I would much prefer the camera turn it to Classic Chrome too when in C1....unless I am doing it wrong.
 
Raymond Lin said:
Looks like the recipe is there in the setting under C1, but it applies to ALL The film sims that the dial is set to. So the Reggie Portra will do it's thing on Provia, Velvia etc. Which means I have to remember to turn it to Classic Chrome too when using it.

I would much prefer the camera turn it to Classic Chrome too when in C1....unless I am doing it wrong.
Click to expand...
Does sound odd. I assume the film sims are set to one of the custom dials on the camera? Maybe they override any custom settings, across all settings pages on the camera?
 
colourofsound said:
Does sound odd. I assume the film sims are set to one of the custom dials on the camera? Maybe they override any custom settings, across all settings pages on the camera?
Click to expand...

Yeah, on the XS10, the left dial came assigned to film sim selection. So you just turn and pick a factory sim. Very useful, but in there, there isn't a space for custom recipe. Instead, the custom is set to C1 in the menu. I would be good if there is a empty slot in the dial itself for custom recipes.
 
Raymond Lin said:
Yeah, on the XS10, the left dial came assigned to film sim selection. So you just turn and pick a factory sim. Very useful, but in there, there isn't a space for custom recipe. Instead, the custom is set to C1 in the menu. I would be good if there is a empty slot in the dial itself for custom recipes.
Click to expand...
I think you can you assign custom recipe selection to an fn button if there is one that you don't need currently
 
Raymond Lin said:
Yeah, on the XS10, the left dial came assigned to film sim selection. So you just turn and pick a factory sim. Very useful, but in there, there isn't a space for custom recipe. Instead, the custom is set to C1 in the menu. I would be good if there is a empty slot in the dial itself for custom recipes.
Click to expand...

Can't you assign custom function to the SPAM dial ?
 
leaky5 said:
I think you can you assign custom recipe selection to an fn button if there is one that you don't need currently
Click to expand...

Noooope.

The only fn button left are ISO and Q and I like them to stay as they are, Q for quick mention is useful.

On the back there is Menu/ok and Display/Back and the joystick.
 
You must log in or register to reply here.
Back
Top