Question about Intrepid Camera lens board.

[MrDrizz]

As I yet don't have the camera but have now bought 2 lens, a Schnieider-S 135 and 210, Copel 0 and 1.

Both without a lens board.

The plan is to 3D print the boards and while I have the size I do not know how thick they need to be.

How thick are the lens boards for the Intrepid 4x5?

Cheers.

 

[Woodsy]

From what I can see, linhoff style lens boards are nominally 1.9 - 2.0mm thick.

I have learnt that when it comes to intrepid cameras, be prepared to do a tiny bit of modding / experimenting to get things to fit right. In my intrepid 8x10, I use one of their sinar to linhoff converters, and branded linhoff style lens boards don't fit past the retaining clip at the top. As such, I need to remove the retaining clip and file it down - better this way round then filing down my lens boards!

I should add that the same lens boards fit in my Ebony without issue.