dkh
Suspended / Banned
- Messages
- 931
- Name
- Dilip
- Edit My Images
- No
I have a NicePhoto N680A that I use ocassionally at events. It came with a trigger that for some reason stopped working yesterday (first time it didn't trigger).
I changed the battery and when I press the trigger it ligts up green. It used to do this before when it worked so the battery seems fine in the trigger. I fully charged the flash (have a spare and tried that too). The flash fires if I press the 'test' button on the rear of the flash or if I use another trigger connected via a 3.5mm cable.
Both the flash and the trigger have dip switches and I think this is where the problem lies. There are four switches, I have matched the up/down positions of these switches on both the units but the trigger still doesn't fire the flash.
Anyone know what else to try?
Edit - I want to use the original trigger because the 3.5mm connector is 'loose' and if there is any tension from the weight of the dangling trigger for example, it won't work.
I changed the battery and when I press the trigger it ligts up green. It used to do this before when it worked so the battery seems fine in the trigger. I fully charged the flash (have a spare and tried that too). The flash fires if I press the 'test' button on the rear of the flash or if I use another trigger connected via a 3.5mm cable.
Both the flash and the trigger have dip switches and I think this is where the problem lies. There are four switches, I have matched the up/down positions of these switches on both the units but the trigger still doesn't fire the flash.
Anyone know what else to try?
Edit - I want to use the original trigger because the 3.5mm connector is 'loose' and if there is any tension from the weight of the dangling trigger for example, it won't work.
Last edited: