Massive Dev

[Barney]

Hi,

I cant find the Bellini HC in the chemicals bit, would it be ok to use HC 110 instead?

 

[Kevin Allan]

Absolutely

 

[sirch]

Why not use it in the way that Bellini recommend?

https://www.bellinifoto.it/wp-content/uploads/2021/10/EURO-HC.pdf

 

[Barney]

Thanks for the replies, I am using the mixing ratio from the data sheet as suggested, and its the development time that I needed for the film

But the film I am using is not among those listed, AGFA APX 100,

The Massive Dev app has the film listed but not the develop chemical neither has it the KODAK HC110 oddly.

I am getting 7:30 seconds from the app.

 

[ChrisR]

APX100 is allegedly Kentmere 100 re-badged. MDC has a time of 5:75 for K100 in HC-110 dilution B (1+31), but note that the temp is 22C. I use a time of 6m 30 for K100 in dilution B, and it seems to work fine.

 

[Barney]

I went with the app as I didnt see your post Chris.

I got the temperature bang on at 20.3 degrees. There are Images on the film strip so something has happened.

Letting it dry now, this is so exciting even though they are only daft snaps to check on the camera being lightfast etc.

 

[zx9]

APX100 is allegedly Kentmere 100 re-badged. MDC has a time of 5:75 for K100 in HC-110 dilution B (1+31), but note that the temp is 22C. I use a time of 6m 30 for K100 in dilution B, and it seems to work fine.

Reading down the thread I was thinking 'Which version of APX 100 and how old?' Not that it matters now that @Barney has negatives processed.

 

[Barney]

Ouch



That's how I remember pictures used to look