Lencarta smartflash

Iceax

Iceax

Suspended / Banned
Messages
256
Name
Andy
Edit My Images
Yes
Evening all

So I recieved my order of the smart flash kit a couple of weeks ago but as my youngest was admitted to hospital I've not had time to look at it.

Set it up on Friday and was sort of struggling with the flash controllers.

Can the power be adjusted from the on camera transmitter.

I did what I uptight was turn it up but on the flash unit the display didn't change

Thanks

A
 
As per the instructions...
Set dipswithes to the same on transmitter and each receiver
Switch transmitter on, if the LCD display is showing somewhere between 1/1 and 1/128 then it's in the wrong mode, press and hold the set button for 2 seconds to change to the correct mode for studio flash
Plug receiver into each head, set receivers to different channels (e.g. 1, 2, 3)
Set channel on transmitter to 1, it will now fully control the flash head that is on channel 1, i.e. adjust power, turn flash ready beep on/off, turn modelling lamp on/off, set other flash heads accordingly.

Regardless of the channels set, the flash will fire PROVIDED that all the dipswitches are set the same
 
Thanks garry I was a little disappointed there were no instructions at all for flash or receivers etc

I'll try the above

Thanks.
Andy
 
Iceax said:
Thanks garry I was a little disappointed there were no instructions at all for flash or receivers etc

I'll try the above

Thanks.
Andy
Click to expand...
The instructions are all on the website under "Support"
 
Thanks @Garry Edwards worked a treat..

Only got one flash up and running but happy with the results

Will post some pics soon


A
 
You must log in or register to reply here.
Back
Top