Lencarta and Speedlights
- Thread starter AdamNZ
- Start date
OP
AdamNZ
Suspended / Banned
- Messages
- 394
- Name
- Adam
- Edit My Images
- Yes
The speedlights are the Youngnuo 560 IV's and I've been triggering them with the Youngnuo YN560-TX wireless trigger. I'm wanting to purchase a strobe kit but I'd like the ability to keep using the Youngnuo's in combination with the stobe(s) to light backgrounds etc.
Garry Edwards
Moderator
- Messages
- 13,475
- Name
- Garry Edwards
- Edit My Images
- No
You can set the Lencarta flashes to act as a slave, this will work provided that light from the hotshoe flash reaches the sensor, which it should normally do without problem.
If the flashgun is firing a pre-flash, set the slave to S2. If it isn't, set it to S1.
If the flashgun is firing a pre-flash, set the slave to S2. If it isn't, set it to S1.
OP
AdamNZ
Suspended / Banned
- Messages
- 394
- Name
- Adam
- Edit My Images
- Yes
Thanks
Phil V
Suspended / Banned
- Messages
- 26,303
- Name
- Phil
- Edit My Images
- No
As neither the current Lencarta triggers or the 560TX have receivers with hot shoes available, optical triggering is your only cheap option. Anything else will be start from scratch kind of expensive.
Just thought...
Except, 3 Yongnuo RF 603's which will let you put your 560tx on one and your Lencarta transmitter on the other.
Just thought...
Except, 3 Yongnuo RF 603's which will let you put your 560tx on one and your Lencarta transmitter on the other.