Leatherette

Asha

Asha

Blithering Idiot
Suspended / Banned
Messages
11,274
Name
Asha
Edit My Images
Yes
I'm presuming that I've posted this in the correct section...If not then I'm sure one of our friendly mods will move it on my behalf ;)

I have a few old cameras that due to their age etc, have their leatherette starting to peel off the camera bodies.:(

Some bodies are wood, others are of metal.

Question:

Which adhesive do I use that will not damage either the leatherette or the bodies?

I realise that some makes in the UK may not be available in my local stores but tbh there are so many diiferent glues on the market, i really wouldn't know where to start so your advice would be appreciated.:thumbs:
 
For metal bodies, i use Pliobond. It is grippy enough and can be removed with solvents if necessary.
You can get it from maco-direct iirc :)
 
Last edited:
robhooley167 said:
For metal bodies, i use Pliobond. It is grippy enough and can be removed with solvents if necessary.
You can get it from maco-direct iirc :)
Click to expand...

Thanks Rob,....I'll take a look at that.:thumbs:
 
Asha said:
ha ha i wondered why i couldn't find it!!
Thanks for the link......does it keep ok after it's been opened or is it like many glues, renders itself useless after a short period?
Click to expand...

yeah it stores fine, its a 2 part adhesive so you need to stir it before you use it. It comes in a glass bottle with a metal top so it keeps a good seal :)
 
robhooley167 said:
yeah it stores fine, its a 2 part adhesive so you need to stir it before you use it. It comes in a glass bottle with a metal top so it keeps a good seal :)
Click to expand...

Sounds like it could be the ideal product (for the metal bodies at least!)......unless anyone else has used other adhesives without problems.
 
Asha said:
Sounds like it could be the ideal product (for the metal bodies at least!)......unless anyone else has used other adhesives without problems.
Click to expand...

I read numerous threads on APUG and FADU where they reccomended it. It would probably be fine on the wooden bodies as well
 
Remember that most 35mm bodies at least require the coverings to be removed for servicing, So although good old superglue works wonders for sticking the leatherette down, it won't be a good idea if you ever need to have the camera repaired!
 
Alan Clogwyn said:
Remember that most 35mm bodies at least require the coverings to be removed for servicing, So although good old superglue works wonders for sticking the leatherette down, it won't be a good idea if you ever need to have the camera repaired!
Click to expand...

A very good point to bear in mind....thank you!

As it is the cameras in question are predominantly folders where the peeling leatherette is on areas which would not in any way affect repairs or servicing.

I will however take your advice on board in case I end up doing similar repairs to a camera where screws etc may need to be accessed.
 
Asha said:
A very good point to bear in mind....thank you!

As it is the cameras in question are predominantly folders where the peeling leatherette is on areas which would not in any way affect repairs or servicing.

I will however take your advice on board in case I end up doing similar repairs to a camera where screws etc may need to be accessed.
Click to expand...

Its best to leave a little void in the glue around any screwheads, don't want to gunk them up with contact adhesive. Cleaning the screwheads out to get a screwdriver in takes a long time... :bang:
 
robhooley167 said:
Its best to leave a little void in the glue around any screwheads, don't want to gunk them up with contact adhesive. Cleaning the screwheads out to get a screwdriver in takes a long time... :bang:
Click to expand...

:lol: sounds like you've been there, done that and learnt by your mistake!!
 
Asha said:
:lol: sounds like you've been there, done that and learnt by your mistake!!
Click to expand...

I've re-skinned 4 cameras, it was bound to happen on the first time :bang:
 
Got the glue on order Rob.:thumbs:....I'll let you know how I go on!

Thanks for the link!
 
You must log in or register to reply here.
Back
Top