Garryyyyyyyyyyyyyy

DannyDMR

Suspended / Banned
Messages
746
Edit My Images
Yes
Hello need a little advice,

I am in need of a sync cable but not sure which one, I asked Wex but they are unsure also.

I have these trigger/reciever set and a Smartflash 200

Will this cable work?

the plus for each end are correct for both the receiver and Smartflash. any reason they won't work?

thanks to all

Danny
 
I can't really see the connection on the receiver, but if it really is correct then it should be fine
 
Danny have you had a look at the RF603 you can get them a lot cheaper and they do the cords I got mine from Amazon at £32. for two if you go on Flea bay they are £20 for 2
And you can get them with pc sync cords.
 
cheers Simon, i already have the trigger/receiver, i was using them on my speedlight to trigger the studio lights but my speedlight has gone bottoms up so need a sync cable quick as have shoot in the morning
 
JonathanRyan said:
If the receiver has a 3.5mm jack then save yourself some money.

http://www.maplin.co.uk/3.5mm-mono-plug-to-plug-lead-1170

A word of caution when trying this cheaper route. if you observe the hanhel cable, the jack with the 90 degree end is half the size of a headphone jack and is divided into three sections MONO HEADPHONE LEADS WON'T WORK lol
I know because i have the tf transceivers. Buy the cable, and enjoy. After all its only one cable you need
 
its not 3.5 both ends, 1 end fits the receiver (Same manufacturer) the other is a 3.5 jack plug. I got the lead today, works great thanks to all for the help and advice much appreciated
 
Cool Beans!
Funny enough i had to dig mine out last night, im papping my brother in his graduation today and thought a bit of off camera brolly flash would be nice and i bought new batteries for the transmitter, I've had the triggers over a year and hey! Transmitter battery is still ok, charged the receiver though im not mental!
Glad to hear everything worked out, funky triggers ain't they
 
Back
Top