ColorMunki calibration help!

[seumas12345]

Hi guys,

I'm new to this forum and I was hoping to get some technical help. I just bought a new Dell U2410 monitor and ColorMunki Photo.

I have done heaps of research on the web and it looks like there are heaps of opinions/options/possibilities of how to calibrate the Dell U2410 (and other montors) with the ColorMunki. How have other people used the ColorMunki to calibrate their monitors (what settings, easy or advanced etc...)?

I set my Dell U2410 monitor preset to "Custom" and followed the ColorMunki step by step software to calibrate. I used "Advanced" profiling, and selected the ColorMunki to set the luminance level to 120, and target white point for display to D65 (default). After following ColorMunki's instructions after this (setting brightness to 4 and contrast to 50), it seems that it has calibrated the monitor. It doesn't look too green or red like some people have experienced in other threads.

Is what I have done above the right way to calibrate my monitor? Have I missed something or is there anything I should have done differently?

Cheers

 

[kelack]

Welcome to the forum, for future, you only need to post one thread

I'm going to close your two duplicates. Hope you find everything you need here