Box Brownie
Suspended / Banned
- Messages
- 17,645
- Edit My Images
- No
Hi all
This is a bit like a combo of WAMT & WBMT
I have a 69 plate Ford Kuga, only second owner (it was a returned Mobility scheme car) and because of Covid lockdown etc I have not added much mileage. Still under 4000miles.
It was serviced in Dec2020 and all good including the windscreen washer......nice strong jetting.
However, about 2 weeks back I noted the jets were all too feeble.....thinks top the wash reservoir up. It did not take much so certainly not run out???
But when I topped it up some dark slimy crud floated to the fill point. Damn I thought what the heck is that!
Fast forward to earlier today ~ I syphoned out the reservoir and refilled about 4 times. Thinking that the crud had blocked the pump intake so needed a way to try to get rid of it and some certainly was removed by the syphoning method
Left it topped full but still poor jetting
, came back to the car a few hours later to do the click 'n collect shopping and the washer is worse......pump motor whizzing away but no water. I thought I had b*****ed the system with my syphon hose and it had leaked out! But no, a top up needed barely anything!
So, what the heck has happened.......
I can only surmise that though the pump motor runs the pumping action has now 100% failed. NB AFAIK the rear screen is a separate circuit and pump unit.....but that has also failed.
Sorry so long winded......
But has anyone had anything like this happen and I wonder if this system is covered by the warranty???
TIA for any insights
This is a bit like a combo of WAMT & WBMT

I have a 69 plate Ford Kuga, only second owner (it was a returned Mobility scheme car) and because of Covid lockdown etc I have not added much mileage. Still under 4000miles.
It was serviced in Dec2020 and all good including the windscreen washer......nice strong jetting.
However, about 2 weeks back I noted the jets were all too feeble.....thinks top the wash reservoir up. It did not take much so certainly not run out???
But when I topped it up some dark slimy crud floated to the fill point. Damn I thought what the heck is that!
Fast forward to earlier today ~ I syphoned out the reservoir and refilled about 4 times. Thinking that the crud had blocked the pump intake so needed a way to try to get rid of it and some certainly was removed by the syphoning method
Left it topped full but still poor jetting
, came back to the car a few hours later to do the click 'n collect shopping and the washer is worse......pump motor whizzing away but no water. I thought I had b*****ed the system with my syphon hose and it had leaked out! But no, a top up needed barely anything!So, what the heck has happened.......
I can only surmise that though the pump motor runs the pumping action has now 100% failed. NB AFAIK the rear screen is a separate circuit and pump unit.....but that has also failed.
Sorry so long winded......
But has anyone had anything like this happen and I wonder if this system is covered by the warranty???
TIA for any insights
Last edited: