650D - Last image display

markimage · 26 Mar 2013

My 650D no longer displays the last image I took for a few seconds on the display.
Is there a setting I may have changed without realizing?

RichardTaylor · 26 Mar 2013

For Canon DSLRS it is usually under Menu/Review time (it can be set to zero)
See page 200 of the (English) instruction manual.

andyred · 26 Mar 2013

Yes, sounds like you've adjusted the review time to 0 as Richard says.

Go to the play back menu in the settings and you can adjust it to however many seconds you like...

markimage · 26 Mar 2013

Thanks guys, I have checked that and its set to 2 seconds ?

andyred · 26 Mar 2013

markimage said:
Thanks guys, I have checked that and its set to 2 seconds ?

Try doing a factory reset and see if that allows the image to show ...

Drewpyfz6 · 27 Mar 2013

You could try changing the review value to say "4", before doing a full reset (if you have any personal settings).
See if that works and then change back to "2".

markimage · 28 Mar 2013

Thank you all. Tried all suggestions but still not working. I will contact Canon. A strange one!

andyred · 28 Mar 2013

markimage said:
Thank you all. Tried all suggestions but still not working. I will contact Canon. A strange one!

Hope you get it sorted out ...