Recent content by apollo

Formatting won't have made any difference a formatted card can still have items recovered, just as easy as deleted stuff.

A pic of the soft box mount would help

Off course your right, I was testing it with the built in flash which obviously adds the compensation which wouldn't happen when using the flash manually.

Ok im not familiar with Canon but it does on my Nikon D800 even in manual

Have you tried adjusting the flash output to see if it changes the reading or if it stays the same as this would indicate a fault with the meter

There is another thread just started where someone has the opposite problem with a 308s were everything is overexposed. One more thing to try is check there is no exposure comp dialed in on the camera.

Just double check there is no exposure comp dialed in on the camera (i've done this myself in the past and wondered why pics where over exposed) if thats OK I think im out of ideas

Is the meter set at 1/3 stops and is it set in flash mode? not sure what you mean by meter is in manual mode.

Did you have the white sphere on the Sekonic? Have you got the Sekonic reading in 1/3 stops

Either set it manually with a grey card or shoot in Raw and adjust later

I had the exact same problem a few weeks back with DSLColorlabs. There is 2 things you need to do, first of all download the profile for the paper they are printed onto then convert your image with that profile (there s tutorials in the site now to do it) also when uploading the images make sure...

+1 for the Tamron as good as the Nikon from 70-200 but better from 200-300. Also agree with Demilion VR is pretty useless for sport.

If cost isn't an issue then a Lastolite hilite is the easiest way to go.

There should be very little sag, if it is new contact seller for replacement

Set it to 1/3 stops and it will match your cameras apertures