using YN-568 with a YN622N-TX

[ditonics]

Hi,

I have a YN568 mounted on the yn622 transceiver, it is triggered by a YN622N TX and that all works fine in manual.
Can I get the power and zoom of the flash to be controlled wireless by the YN622n TX command module?

Thanks

 

[Phil V]

Hi,

I have a YN568 mounted on the yn622 transceiver, it is triggered by a YN622N TX and that all works fine in manual.
Can I get the power and zoom of the flash to be controlled wireless by the YN622n TX command module?

Thanks

Is it a Nikon or Canon YN568?

 

[ditonics]

With the gear that exists in a C and N version it is all N

 

[sep9001]

Yes, as long as the flash is in TTL.

 

[ditonics]

I have just updated the YN622N TX and the YN685 to the latest firmware.
Using the YN568 in iTTL mounted on a 622 and the YN685 in radio mode '622N R slave' now allows me remote control over the power.
I don't seem to be able to get the zoom to work in remote on either speedlites.
Any more suggestion?

 

[sep9001]

I am sorry don't have any yn flashes anymore, but could try it and see if it works on the sb800 or the sn600sn tonight if you want?

 

[edz]

Have you tried setting the 568 in auto? I found that when I set my zoom to 105mm, it didn't alter the zoom with the triggers. Setting it to auto did.