stevelmx5
Suspended / Banned
- Messages
- 10,176
- Name
- Steve
- Edit My Images
- No
As a follow up to my other post, this is my progress so far with the Patent Pending, "Dark Hoodie" ;0)

This is basically a tube made up of two layers. The outer layer can be any colour and is standard hoodie fleece material, the inner layer is thin blackout material. There are 2 strips of self adhesive magnet inside a c-shaped seam which goes over the edge of the original hood on your top and locks around it. There are then 2 more strips of magnet on the bottom edge so it can be clicked together to form a complete light-tight tube with a drawstring opening that closes around the rear of the camera.

I'm estimating around 14" total length so you're not too close to the ground glass with an end diameter of around 12" to go around the camera but that can be adjusted to test it out.
The idea is that when you don't need it, it stays attached to the original hood of your hoodie and can be left inside the hood when it's on your back. When you want to focus, pull your hood up, extend the material tube and pull the drawstring tight around the camera :0)

This is basically a tube made up of two layers. The outer layer can be any colour and is standard hoodie fleece material, the inner layer is thin blackout material. There are 2 strips of self adhesive magnet inside a c-shaped seam which goes over the edge of the original hood on your top and locks around it. There are then 2 more strips of magnet on the bottom edge so it can be clicked together to form a complete light-tight tube with a drawstring opening that closes around the rear of the camera.

I'm estimating around 14" total length so you're not too close to the ground glass with an end diameter of around 12" to go around the camera but that can be adjusted to test it out.
The idea is that when you don't need it, it stays attached to the original hood of your hoodie and can be left inside the hood when it's on your back. When you want to focus, pull your hood up, extend the material tube and pull the drawstring tight around the camera :0)
