Beginner How do I reset a YN565ex and YN622n..

[sep9001]

Hi

I have looked online but cannot find anything, also for some reason I cannot download the manual for the YN622ntx and could not find anything about reseting the YN565ex in the manual.

Any pointers on how to reset both?

Thank you

Kev

 

[Box Brownie]

The 622 manual is here http://www.hkyongnuo.com/e-detaily.php?ID=339

 

[Phil V]

The best resource for the YN622s is known as the TOYUG but I don't know it's Canon largely, there's similarities but major differences too.

 

[sep9001]

The 622 manual is here http://www.hkyongnuo.com/e-detaily.php?ID=339

Thanks, tried that link earlier when searching the web on the PC but it does not seem to load. Not sure if it is a issue here or with the site.

 

[sep9001]

The best resource for the YN622s is known as the TOYUG but I don't know it's Canon largely, there's similarities but major differences too.

Thanks, will have a read on that site.

 

[kendo1]

Here's the 'other' PDF for the YN622C and TX, seeing as the original is unreadable! :
https://docs.google.com/file/d/0B77OmmGIg0gMVFpqNkpBYXBHajA/edit?pli=1

You need Cfn 17 to reset to factory settings for the YN565.
This is a useful review and full explanation of how to get custom settings for the flash:

http://speedlights.net/2011/08/28/yongnuo-yn-565-ex-flash-review/#Operation

about 1/4 way down the page under 'settings and customisation'

 

[sep9001]

Thank you all for the help and suggestions.

I have now reset t the triggers and the flash. I contacted Yongnuo who have confirmed to reset the YN565ex Nikon I need to follow as below:

Set the advanced settings through hotkey of [Advanced Setting].
Setting method of hotkey: Press the [Advanced Setting] button and the item to be set displays; when <09 CL EA --> is displayed, hold the [OK] button to recover the default settings.