nickjohnwatson
Suspended / Banned
- Messages
- 3,307
- Name
- Nick
- Edit My Images
- Yes
A few months ago I made a headboard for my bedroom out of fence posts, pallets and roof joists (thread here) - and the plan was always to make a 4 poster bed for my daughter.
I started the plans but shelved it due to unexpected car bills etc and holidays but I had some time over the last week to make it.
I bought ........
4 3"x3" inch fence posts
2 3"x2" posts
2 6"x2" roof joists
some 2"x2" lengths and some rough cut fencing for the lats.
We planed, morticed and sanded the uprights, then notched the side rails and mitred the top rails at the corners.
Prised the lats off the pallets and put them through the thickness planer and sanded them all down.
made sure everything was smooth then put it all together.
Once it was up we drilled and dowelled all the joints to keep it together and sturdy, the only screws in the build are the ones holiding the side rails in place (screwed into the uprights)
When it was all built I gave it a run over with a hand sander then finished it with some wax
Pretty chuffed with it considering its not my job and I work in a call centre lol.
Anyways here's a few pics - let me know what you think





I started the plans but shelved it due to unexpected car bills etc and holidays but I had some time over the last week to make it.
I bought ........
4 3"x3" inch fence posts
2 3"x2" posts
2 6"x2" roof joists
some 2"x2" lengths and some rough cut fencing for the lats.
We planed, morticed and sanded the uprights, then notched the side rails and mitred the top rails at the corners.
Prised the lats off the pallets and put them through the thickness planer and sanded them all down.
made sure everything was smooth then put it all together.
Once it was up we drilled and dowelled all the joints to keep it together and sturdy, the only screws in the build are the ones holiding the side rails in place (screwed into the uprights)
When it was all built I gave it a run over with a hand sander then finished it with some wax
Pretty chuffed with it considering its not my job and I work in a call centre lol.
Anyways here's a few pics - let me know what you think





Last edited:






