90 degree tube clamps

[kartracer]

I'm looking for some clamps (preferably screw) to suit approx. 25mm-30mm tube, that I can use to clamp on one tube, then clamp the other at ninety degrees. No need for 1/4UNC threads or anything like that - its just to hodl the clamps. Anyone know of anything suitable?

 

[digitalfailure]

I don't think these are exactly what your after, but I use manfrotto super clamps.

 

[paul williams]

Not quite too sure what you're asking for, but for tube-to-tube at right angles, the double superclamp is the 'usual' option. This boom pivot clamp is also an option as is this, but TBH, it's always good to have a selection of Superclamps & the Calumet ones (Chinese) are good value, come with a standard stud & have a re-positionable locking lever which the Manfrotto's don't. Use these to lock them at rightangles or use the supplied studs to let them rotate, if required. Calumet Amazon or eBay shops will allow you to order with free postage BTW.

Paul

 

[kartracer]

The double superclamp is close to what I need, but something much lighter would do.

 

[JonathanRyan]

Something like this?

http://compare.ebay.co.uk/like/400239396255?var=lv&ltyp=AllFixedPriceItemTypes&var=sbar

Google up Framers clamps.

 

[jezgb]

Is this from RS what you're after?

http://uk.rs-online.com/web/p/tubular-framework-system/4181456/

Not cheap, but if it does the job... They also do 30mm stuff.

You can order from RS with a credit card - you don't need to have an account any more. Postage is a fiver IIRC.

HTH!

 

[paul williams]

For smaller diameters I use Laboratory clamps but for the 'cheapest' option these are probably OK, or these from the UK. I would always go for Superclamps myself as they will last a lifetime and are just so versatile.

Paul

 

[kartracer]

This is getting close to what I need:

http://www.megatradestore.com/Tube_...241/90_Crossover_161_D_Tube_Clamp___Key_Clamp

But I need nearer 25/30mm.

Maybe this:

http://www.themetalstore.co.uk/products/offset-90-degree-crossover

The type of clamp is called a 'crossover' - either the above, or maybe an aerial clamp might do.

 

[kartracer]

Is this from RS what you're after?

http://uk.rs-online.com/web/p/tubular-framework-system/4181456/

Not cheap, but if it does the job... They also do 30mm stuff.

You can order from RS with a credit card - you don't need to have an account any more. Postage is a fiver IIRC.

HTH!

Those look great! Will need to confirm my tube diameters.

 

[paul williams]

This is getting close to what I need:

http://www.megatradestore.com/Tube_...241/90_Crossover_161_D_Tube_Clamp___Key_Clamp

But I need nearer 25/30mm.

Maybe this:

http://www.themetalstore.co.uk/products/offset-90-degree-crossover

The type of clamp is called a 'crossover' - either the above, or maybe an aerial clamp might do.

In that case loads of sizes and options here

Paul